Shockwave 36 RTR w/T-Drive

Key Features
Water-cooled Dynamite® .32 marine w/ Tiger Drive and electric starter
Completely ready-to-run
Stainless steel and aluminum running hardware
Pro Boat™ propeller
Pre-painted fiberglass hull
Pro Boat™ AM 27mHz Pistol grip radio system
Speeds over 35 mph

Overview
Measuring over three feet in length, the Pro Boat ShockWave 36 is a ready-to-run deep-vee speedster that can reach speeds in excess of 30mph. The power comes from the installed Dynamite .32 Marine engine. The Dynamite .32 Marine is water-cooled and comes equipped with a convenient electric start and high performance tuned exhaust system. Control is provided by ProBoat's trusty pistol grip radio system that offers drivers analog adjustment of steering rates as well as throttle and steering trim.

The ShockWave's workmanship is equally impressive. The hull is professionally built from fiberglass and painted with the same technologies used in todays automotive finishes. Rubber motor mounts significantly reduce vibration and lengthen the hull’s life. There are no plastic parts on this boat. All the running hardware is stainless steel and aluminum, including the adjustable trim tabs that let drivers adjust the "ride" for varying wave conditions. Anti-skid fins, an oversized rudder and an adjustable strut for the Pro Boat propeller add even more ride-tuning options.

This is high-octane RC offshore excitement at its best.

Specs
Length:36 in.
Beam:9 in.
Engine Size:.32 water-cooled Marine
Weight:6.25 lbs.
Speed:30 m.p.h.
Radio:2 channel
Hull Material:fiberglass
Trim Scheme Colors:white
Prop Size:1.90x3.0 in.
Hull Type:Deep-V
Kit/RTR:RTR
Drive System:Flex shaft
Exhaust:Tuned pipe
Needed to Complete
Blue Thunder™ 20% Fuel (quart)
500cc Fuel Bottle
Glow Plug Wrench
7.2v Battery and charger
Glow starter
12 “AA” alkaline batteries (8 for the transmitter and 4 for the receiver)
Clear tape to seal radio box

£319